Back to articles
Research Articles
Volume: 35 | Article ID: art00014_1
Image
Mottle evaluation of coated cardboards printed in inkjet
Sandra Rosalen
Johannes Backhaus
  DOI :  10.2352/ISSN.2169-4451.2019.35.65  Published Online :  September 2019
Abstract

In this study the methods suggested in the standards ISO/TS 15311-2 / ISO/IEC 24790 and the method suggested from FOGRA (M-Score) to measure print mottle were conducted and compared with visual evaluations. The aim was to understand if one of them is more adequate for evaluation of mottle in inkjet print on coated cardboards and if pre- and post-treatments on the cardboards have an influence on print mottle.<br/> The measurements showed that the first method has a higher accordance with visual evaluations. A second finding was that a pretreatment with primer and post treatment with IR-radiation to improve ink adhesion and drying can also reduce print mottle.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society for Imaging Science and Technology
Subject Areas :
Views 34
Downloads 9
 DOI 10.2352/ISSN.2169-4451.2019.35.65
 articleview.views 34
 articleview.downloads 9
  Cite this article 

Sandra Rosalen, Johannes Backhaus, "Mottle evaluation of coated cardboards printed in inkjet"  in Proc. IS&T Printing for Fabrication: Int'l Conf. on Digital Printing Technologies (NIP35),  2019,  pp 65 - 68,  https://doi.org/10.2352/ISSN.2169-4451.2019.35.65

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2019
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society for Imaging Science and Technology
10.2352/ISSN.2169-4451.2019.35.65
2169-4451(20190929)2019:1L.65;1-
s14.phd
/ist/nipdf/2019/00002019/00000001/art00014
Research Articles
Mottle evaluation of coated cardboards printed in inkjet
RosalenSandra
BackhausJohannes
29092019
2019
1
65
68
2019
In this study the methods suggested in the standards ISO/TS 15311-2 / ISO/IEC 24790 and the method suggested from FOGRA (M-Score) to measure print mottle were conducted and compared with visual evaluations. The aim was to understand if one of them is more adequate for evaluation of mottle in inkjet print on coated cardboards and if pre- and post-treatments on the cardboards have an influence on print mottle.<br/> The measurements showed that the first method has a higher accordance with visual evaluations. A second finding was that a pretreatment with primer and post treatment with IR-radiation to improve ink adhesion and drying can also reduce print mottle.