Back to articles
Articles
Volume: 27 | Article ID: art00064_1
Image
Reproducibility Between Xenon Test Chambers in Different Laboratories
Matthew Comstock
Ann McCarthy
  DOI :  10.2352/ISSN.2169-4451.2011.27.1.art00064_1  Published Online :  January 2011
Abstract

An important foundation of standardized testing is that multiple test laboratories are able to reproduce results following the standardized test method. In prior research it was found that, when testing for the light stability of printed materials, two Xenon test chambers located in different laboratories following the same test procedure were not able to provide consistent inkjet print image fade results. Continuing investigation has shown that airflow and air quality were responsible for the discrepancy.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 5
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2011.27.1.art00064_1
 articleview.views 5
 articleview.downloads 0
  Cite this article 

Matthew Comstock, Ann McCarthy, "Reproducibility Between Xenon Test Chambers in Different Laboratories"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP27),  2011,  pp 251 - 254,  https://doi.org/10.2352/ISSN.2169-4451.2011.27.1.art00064_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2011
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(20110101)2011:1L.251;1-
nip_v2011n1/splitsection64.xml
/ist/nipdf/2011/00002011/00000001/art00064
Articles
Reproducibility Between Xenon Test Chambers in Different Laboratories
ComstockMatthew
McCarthyAnn
01012011
2011
1
251
254
2011
An important foundation of standardized testing is that multiple test laboratories are able to reproduce results following the standardized test method. In prior research it was found that, when testing for the light stability of printed materials, two Xenon test chambers located in different laboratories following the same test procedure were not able to provide consistent inkjet print image fade results. Continuing investigation has shown that airflow and air quality were responsible for the discrepancy.