Back to articles
Articles
Volume: 25 | Article ID: art00053_2
Image
The Prospects of Inkjet Printing for Displays and Sensor Tapes
  DOI :  10.2352/ISSN.2169-4451.2009.25.1.art00053_2  Published OnlineJanuary 2009
Abstract

When fabricating electronic devices, an all-additive solution-based process would have the lowest cost and complexity, because it employs the lowest number of processing steps and it consumes the least amount of process material. However, there are still many challenges on the way to achieving electronic circuits by such processes. Here, we present inkjet printing approaches to fabricate displays and sensor circuits.

Subject Areas :
Views 9
Downloads 1
 articleview.views 9
 articleview.downloads 1
  Cite this article 

J.H. Daniel, A.C. Arias, T. Ng, B. Russo, B.S. Krusor, "The Prospects of Inkjet Printing for Displays and Sensor Tapesin Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP25),  2009,  pp 599 - 602,  https://doi.org/10.2352/ISSN.2169-4451.2009.25.1.art00053_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2009
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA