Back to articles
Articles
Volume: 23 | Article ID: art00108_1
Image
Edgeline Inkjet Drying Technology
  DOI :  10.2352/ISSN.2169-4451.2007.23.1.art00108_1  Published OnlineJanuary 2007
Abstract

The HP CM8060 MFP with Edgeline technology is the result of significant innovations in many key areas. This presentation speaks to the key design challenges overcome in creating an image on the page and getting it dry at suite average throughputs of 60 ppm black and 50 ppm color. Our goal was to WOW the customer with exceptional image quality, reliability, and total cost of ownership. These objectives put significant burdens on the drying system. The final solution required tremendous collaboration between ink chemists, imaging scientists, hardware designers and firmware engineers.Breakthroughs in the ink domain include a proprietary bonding agent enabling adhesion of the ink to the paper without significant penetration into the paper. This was key for creating brilliant images that dry quickly. Additionally, varying the sequence of drying and laying down ink interacted with the speed at which the image dried.While developing the ink, different drying technologies were investigated. The concepts included microwave energy, convective drying, high velocity air, radiant drying, conductive drying, UV curing, and multiple combinations of these concepts.Once the basic technology building blocks were identified, creating a user friendly solution was a significant challenge. Getting the system ready to print and getting the first page quickly on a 120 volt outlet was a challenge. The hardware design is a key element in a drying system that operates efficiently in the first few seconds of startup for virtually every job.The technical details of these topics are explored further in the “Edgeline Inkjet Drying Technology” presentation.

Subject Areas :
Views 10
Downloads 2
 articleview.views 10
 articleview.downloads 2
  Cite this article 

Vance Stephens, Steve Rasmussen, "Edgeline Inkjet Drying Technologyin Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP23),  2007,  pp 473 - 473,  https://doi.org/10.2352/ISSN.2169-4451.2007.23.1.art00108_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2007
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA