Back to articles
Articles
Volume: 20 | Article ID: art00047_1
Image
Representation of Primary Color Tone Reproduction Curves for their Stabilization
  DOI :  10.2352/ISSN.2169-4451.2004.20.1.art00047_1  Published OnlineJanuary 2004
Abstract

This paper proposed and compared different methods of representing the color tone reproduction curve (TRC) for stabilization of the monochorome xerographic printing process. TRC stabilization is vital in maintaining high consistency in color printout. Colors are typically represented by a 3-dimensional representation such as the CIELAB or CIEXYZ colorspaces. For stabilization control, the 3-dimensional representation is redundant due to the fact that limited actuators authority would not account for all the degree of freedom in the data representation. A 1-dimensional reparameterization of the 3-dimensional representation is better suited for the stabilizing control. The proposed parameterization methods involved projection of the 3-dimensional representation onto a parameterization curve. An empirical-based and model-based approach was used to describe this curve. Simulation and experimental results are presented to demonstrate the performance of the different parameterization method subject to measurement noise.

Subject Areas :
Views 19
Downloads 1
 articleview.views 19
 articleview.downloads 1
  Cite this article 

Teck-Ping Sim, Perry Y. Li, "Representation of Primary Color Tone Reproduction Curves for their Stabilizationin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP20),  2004,  pp 198 - 203,  https://doi.org/10.2352/ISSN.2169-4451.2004.20.1.art00047_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2004
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA