Back to articles
Volume: 18 | Article ID: art00002
Toward an automatic color calibration for 3D displays
  DOI :  10.2352/CIC.2010.18.1.art00002  Published OnlineJanuary 2010

This article considers the color correction of a 3D projection display installation. The system consists of a pair of projectors of the same model modified by INFITECGmbH such that they can be used for projection of 3D contents. The goal of this color correction is to reduce the difference between the two mo-dified projectors such as the color difference between them does not disturb the user. Two new approaches are proposed and compared with the Infitec expert correction. One is based on an objective colorimetric match, the other on the optimization of a transform considering the color difference between the two signals.

Subject Areas :
Views 11
Downloads 0
 articleview.views 11
 articleview.downloads 0
  Cite this article 

Jérémie Gerhardt, Jean-Baptiste Thomas, "Toward an automatic color calibration for 3D displaysin Proc. IS&T 18th Color and Imaging Conf.,  2010,  pp 5 - 10,

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2010
Color and Imaging Conference
color imaging conf
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA