Back to articles
Research Articles
Volume: 35 | Article ID: art00030_1
Image
Study on Preparation of Organometal Halide Perovskite and Electron-transporting Layer Thin Film by Ink-jet Printing
  DOI :  10.2352/ISSN.2169-4451.2019.35.148  Published OnlineSeptember 2019
Abstract

In this study, we report to prepare two-dimensional perovskite organometal halide and electron-transporting layer thin films, which are the key layers of solar cell devices by ink-jet printing method. We have developed controllable and optimal inkjet printing process for the growth of perovskite organic metal halide and electron-transporting layer thin films by varying solution properties, printing process parameters (e.g. droplet diameter, voltage, droplet spacing, printing pass), as well as substrate temperature, etc. This demonstration of preparation for organometal halide perovskite and electron-transporting layer films though ink-jet printing offers scope for applying printed electronics technology to manufacture optoelectronic devices.

Subject Areas :
Views 30
Downloads 2
 articleview.views 30
 articleview.downloads 2
  Cite this article 

Yingqun Qi, Beiqing Huang, Weimin Zhang, Zejun Lv, Sunhao Guo, Ti Wu, "Study on Preparation of Organometal Halide Perovskite and Electron-transporting Layer Thin Film by Ink-jet Printingin Proc. IS&T Printing for Fabrication: Int'l Conf. on Digital Printing Technologies (NIP35),  2019,  pp 148 - 151,  https://doi.org/10.2352/ISSN.2169-4451.2019.35.148

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2019
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society for Imaging Science and Technology