Back to articles
Research Articles
Volume: 35 | Article ID: art00019_1
Image
Jetting Very High Viscosities With Piezo-Electric Drop-On-Demand Printheads For Increased Capability Of Photopolymer 3D Printing
Nick Jackson
Wolfgang Voit
Renzo Trip
Angus Condie
Xaar Plc
  DOI :  10.2352/ISSN.2169-4451.2019.35.89  Published Online :  September 2019
Abstract

The inkjet industry is constantly evolving to cater to the needs of emerging and changing markets, requiring new capabilities as well as a drive to increase productivity and reduce cost. Presented is how a new high viscosity and high productivity capability using the Xaar 1003 printhead can extend the application of inkjet for 3D printing of photopolymer materials - with improved mechanical properties and scalability, enabling inkjet to compete with the performance of other photopolymer 3D printing technologies.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society for Imaging Science and Technology
Subject Areas :
Views 22
Downloads 8
 DOI 10.2352/ISSN.2169-4451.2019.35.89
 articleview.views 22
 articleview.downloads 8
  Cite this article 

Nick Jackson, Wolfgang Voit, Renzo Trip, Angus Condie, Xaar Plc, "Jetting Very High Viscosities With Piezo-Electric Drop-On-Demand Printheads For Increased Capability Of Photopolymer 3D Printing"  in Proc. IS&T Printing for Fabrication: Int'l Conf. on Digital Printing Technologies (NIP35),  2019,  pp 89 - 93,  https://doi.org/10.2352/ISSN.2169-4451.2019.35.89

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2019
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society for Imaging Science and Technology
10.2352/ISSN.2169-4451.2019.35.89
2169-4451(20190929)2019:1L.89;1-
s19.phd
/ist/nipdf/2019/00002019/00000001/art00019
Research Articles
Jetting Very High Viscosities With Piezo-Electric Drop-On-Demand Printheads For Increased Capability Of Photopolymer 3D Printing
JacksonNick
VoitWolfgang
TripRenzo
CondieAngus
PlcXaar
29092019
2019
1
89
93
2019
The inkjet industry is constantly evolving to cater to the needs of emerging and changing markets, requiring new capabilities as well as a drive to increase productivity and reduce cost. Presented is how a new high viscosity and high productivity capability using the Xaar 1003 printhead can extend the application of inkjet for 3D printing of photopolymer materials - with improved mechanical properties and scalability, enabling inkjet to compete with the performance of other photopolymer 3D printing technologies.