Back to articles
Research Articles
Volume: 35 | Article ID: art00008_1
Image
Robotic Ceramic Paste Extrusion for Industrial Prototyping and Production
David Huson
  DOI :  10.2352/ISSN.2169-4451.2019.35.38  Published Online :  September 2019
Abstract

Ceramic additive layer manufacture employs a range of different technologies including ceramic paste extrusion, powder/ binder jet and UV and daylight cure ceramic loaded resins. Each of these technologies has its own set of advantages and disadvantages. This paper investigates the possibilities of using a robot multi-axis system to enhance the capabilities of a ceramic paste extrusion process.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society for Imaging Science and Technology
Subject Areas :
Views 13
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2019.35.38
 articleview.views 13
 articleview.downloads 0
  Cite this article 

David Huson, "Robotic Ceramic Paste Extrusion for Industrial Prototyping and Production"  in Proc. IS&T Printing for Fabrication: Int'l Conf. on Digital Printing Technologies (NIP35),  2019,  pp 38 - 41,  https://doi.org/10.2352/ISSN.2169-4451.2019.35.38

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2019
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society for Imaging Science and Technology
10.2352/ISSN.2169-4451.2019.35.38
2169-4451(20190929)2019:1L.38;1-
s8.phd
/ist/nipdf/2019/00002019/00000001/art00008
Research Articles
Robotic Ceramic Paste Extrusion for Industrial Prototyping and Production
HusonDavid
29092019
2019
1
38
41
2019
Ceramic additive layer manufacture employs a range of different technologies including ceramic paste extrusion, powder/ binder jet and UV and daylight cure ceramic loaded resins. Each of these technologies has its own set of advantages and disadvantages. This paper investigates the possibilities of using a robot multi-axis system to enhance the capabilities of a ceramic paste extrusion process.