Back to articles
Articles
Volume: 33 | Article ID: art00030_1
Image
An Electrohydrodynamic (EHD) Jet Printing Method for Increasing Printing Speed
Thanh-Huy Phung
  DOI :  10.2352/ISSN.2169-4451.2017.33.126  Published Online :  November 2017
Abstract

It is well known that drop-on-demand electrohydrodynamic (EHD) jet printing can make small dots and fine line patterns thereby. However, it is believed that drop-on-demand based EHD printing is only limited to very slow printing applications due to small dot size and limited jetting frequencies. In this study, we propose using the change of printed relic shape to enhance printing speed. For this purpose, high molecular polymer was mixed into the silver nanoparticles ink for printing. The proposed method could help to increase the printing speed and reduce the line-pattern width as well. The video of our recent development can be found from website: https://youtu.be/ak6Zl-9yE-c.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society for Imaging Science and Technology
Subject Areas :
Views 26
Downloads 1
 DOI 10.2352/ISSN.2169-4451.2017.33.126
 articleview.views 26
 articleview.downloads 1
  Cite this article 

Thanh-Huy Phung, "An Electrohydrodynamic (EHD) Jet Printing Method for Increasing Printing Speed"  in Proc. IS&T Printing for Fabrication: Int'l Conf. on Digital Printing Technologies (NIP33),  2017,  pp 126 - 127,  https://doi.org/10.2352/ISSN.2169-4451.2017.33.126

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2017
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society for Imaging Science and Technology
2169-4451(20171101)2017:1L.126;1-
s30.phd
/ist/nipdf/2017/00002017/00000001/art00030
Articles
An Electrohydrodynamic (EHD) Jet Printing Method for Increasing Printing Speed
PhungThanh-Huy
01112017
2017
1
126
127
2017
It is well known that drop-on-demand electrohydrodynamic (EHD) jet printing can make small dots and fine line patterns thereby. However, it is believed that drop-on-demand based EHD printing is only limited to very slow printing applications due to small dot size and limited jetting frequencies. In this study, we propose using the change of printed relic shape to enhance printing speed. For this purpose, high molecular polymer was mixed into the silver nanoparticles ink for printing. The proposed method could help to increase the printing speed and reduce the line-pattern width as well. The video of our recent development can be found from website: https://youtu.be/ak6Zl-9yE-c.