Back to articles
Articles
Volume: 32 | Article ID: art00004_1
Image
The Objectives of a National Project of ‘Manufacturing Innovation through Development of Next Generation 3D Printers’ in Japan
Hideki Kyogoku
  DOI :  10.2352/ISSN.2169-4451.2017.32.4  Published Online :  September 2016
Abstract

Technology Research Association for Future Additive Manufacturing (TRAFAM) was established in 2014 to achieve the development of innovative additive manufacturing systems to meet the world's highest standards and the development of manufacturing technologies for high value-added products. In this presentation, the current status of the TRAFAM project is introduced.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society for Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane Springfield, VA 22151 USA
Subject Areas :
Views 18
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2017.32.4
 articleview.views 18
 articleview.downloads 0
  Cite this article 

Hideki Kyogoku, "The Objectives of a National Project of ‘Manufacturing Innovation through Development of Next Generation 3D Printers’ in Japan"  in Proc. IS&T Printing for Fabrication: Int'l Conf. on Digital Printing Technologies (NIP32),  2016,  https://doi.org/10.2352/ISSN.2169-4451.2017.32.4

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2016
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society for Imaging Science and Technology
7003 Kilworth Lane Springfield, VA 22151 USA
2169-4451(20160912)2016:1L.4;1-
dfc_21694451_v2016n1_input/s5.xml
/ist/nipdf/2016/00002016/00000001/art00004
Articles
The Objectives of a National Project of ‘Manufacturing Innovation through Development of Next Generation 3D Printers’ in Japan
KyogokuHideki
12092016
2016
1
4
4
2016
Technology Research Association for Future Additive Manufacturing (TRAFAM) was established in 2014 to achieve the development of innovative additive manufacturing systems to meet the world's highest standards and the development of manufacturing technologies for high value-added products. In this presentation, the current status of the TRAFAM project is introduced.