Back to articles
Articles
Volume: 31 | Article ID: art00048_1
Image
Printed p-type CuI TFTs
  DOI :  10.2352/ISSN.2169-4451.2015.31.1.art00048_1  Published OnlineJanuary 2015
Abstract

Printing technique offers several advantages in manufacturing electronics such as a direct writing of materials, reduction of chemical waste, and reproducibility with high-resolution scale, which are not affordable from other solution-based approaches. Especially for the TFTs fabrication, printing can significantly simplify manufacturing processes by directly defining the channel area, the gate, and the source and drain contacts, allowing for much low costs and high throughput manufacture of TFTs. Most of the printed TFTs have been mainly associated with p-type organic semiconductors and n-type metal oxide semiconductors. In this paper, printed p-type CuI semiconductors are demonstrated for the application of TFTs.

Subject Areas :
Views 23
Downloads 2
 articleview.views 23
 articleview.downloads 2
  Cite this article 

Chang-Ho Choi, Zhen Fang, Jenna Gorecki, Marshall Allen, Chih-Hung Chang, Liang-Yu Lin, Chun-Cheng Cheng, "Printed p-type CuI TFTsin Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP31),  2015,  pp 219 - 220,  https://doi.org/10.2352/ISSN.2169-4451.2015.31.1.art00048_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2015
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society for Imaging Science and Technology