Back to articles
Articles
Volume: 30 | Article ID: art00089_1
Image
Development of the 23”×29.5” Sheet-fed Inkjet Press KM-1
  DOI :  10.2352/ISSN.2169-4451.2014.30.1.art00089_1  Published OnlineJanuary 2014
Abstract

To materialize the “digital print,” we have been developing a new digital printing system with our inkjet technology. We adopted so called “single pass printing system” for the system. It has a page-wide print head array and can print ink droplets on a rapid-delivered paper. We developed a variety of technologies such as a new print head, a new ink, a new image compensation technique, and so on, for the system. We integrated 1,800 printing nozzles into 600 npi density that can eject small droplets in higher frequency. We developed a new ink formulation that can show performances necessary for the single pass printing. We also developed a new technique that can compensate streaky image defects. Combined these new technologies, we achieved to develop a new digital printing system that can print a highresolution and high-quality image quickly.

Subject Areas :
Views 29
Downloads 2
 articleview.views 29
 articleview.downloads 2
  Cite this article 

Mitsuru Obata, Toyoaki Sugaya, Toshiyuki Mizutani, Hideo Watanabe, Toshiyuki Takabayashi, Hirotaka Iijima, "Development of the 23”×29.5” Sheet-fed Inkjet Press KM-1in Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP30),  2014,  pp 372 - 374,  https://doi.org/10.2352/ISSN.2169-4451.2014.30.1.art00089_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2014
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society for Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA