Back to articles
Articles
Volume: 29 | Article ID: art00044_1
Image
Study of Effectors on the Tinting Strength of Water-based Digital Printing Ink
  DOI :  10.2352/ISSN.2169-4451.2013.29.1.art00044_1  Published OnlineJanuary 2013
Abstract

In order to obtain water-based digital printing ink with good coloring property, different kinds of pigments were used to prepare ink samples, by testing the tinting strength of samples to discuss the influence of the variety of pigments and the characteristic of pigments on the coloring property of ink. By changing the content of pigment, as well as the dispersity of pigment, to prepare ink samples, investigate the effect of the content of pigment and the dispersity of pigment on the coloring property of ink. The results showed that different characteristic of pigment has key influence on the tinting strength of ink. The content of pigment is also an important factor that affects the tinting strength of ink. When the content of pigment increases to a certain value, the tinting strength of ink will reach the best state. Besides, the tinting strength will become better with the improvement of dispersity of pigment.

Subject Areas :
Views 9
Downloads 0
 articleview.views 9
 articleview.downloads 0
  Cite this article 

Wang Dandan, Wei Xianfu, Huang Beiqing, "Study of Effectors on the Tinting Strength of Water-based Digital Printing Inkin Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP29),  2013,  pp 171 - 173,  https://doi.org/10.2352/ISSN.2169-4451.2013.29.1.art00044_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2013
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA