Back to articles
Articles
Volume: 29 | Article ID: art00023_2
Image
Mechanical Characterization in Printing and Fabrication of Materials from Nano-Micro Scale
  DOI :  10.2352/ISSN.2169-4451.2013.29.1.art00023_2  Published OnlineJanuary 2013
Abstract

Nanomechanical testing techniques are a valuable tool; assisting both researchers and industry in better understanding of mechanical properties of printing materials at both nano and micro scale. This presentation will examine testing technologies and techniques that can be used to better understand adhesion of toner particles and the frictional effects of the toner particles to the substrate. Results of dynamic testing will also be presented to show how temperature/frequency dependence and changes in modulus can assist in material development to improve print quality and resolution.

Subject Areas :
Views 9
Downloads 0
 articleview.views 9
 articleview.downloads 0
  Cite this article 

Greg Lance, "Mechanical Characterization in Printing and Fabrication of Materials from Nano-Micro Scalein Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP29),  2013,  pp 353 - 353,  https://doi.org/10.2352/ISSN.2169-4451.2013.29.1.art00023_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2013
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA