Back to articles
Articles
Volume: 27 | Article ID: art00101_1
Image
The Research of Process and Characteristic of Pulverized Rounding Surface Treated Toner
  DOI :  10.2352/ISSN.2169-4451.2011.27.1.art00101_1  Published OnlineJanuary 2011
Abstract

The purpose of this study is to research into the relationships between the characteristics of the pulverized rounding surface treated toner (RST Toner) and various surface treatments, BET values and quantities of surface additives. The surface additives with different surface treatments including DDS, HMDS and PDMS are used in this study as the spacer between toner particles before the rounding surface treatment process. In this study, the surface fusion system is used to prepare the RST toner with the circularity about 0.970.

Subject Areas :
Views 9
Downloads 0
 articleview.views 9
 articleview.downloads 0
  Cite this article 

Johnny Wang, Yi-Wei Chen, Ya-Yu Li, Victor Huang, Chien-Shiun Liao, "The Research of Process and Characteristic of Pulverized Rounding Surface Treated Tonerin Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP27),  2011,  pp 395 - 398,  https://doi.org/10.2352/ISSN.2169-4451.2011.27.1.art00101_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2011
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA