Back to articles
Articles
Volume: 27 | Article ID: art00092_2
Image
Image Fix Model for Belt Fusing System
David Battat
  DOI :  10.2352/ISSN.2169-4451.2011.27.1.art00092_2  Published Online :  January 2011
Abstract

A first principle formalism is proposed for image fix to describe Taber abrasion as well as crease in a hot roll belt system, which takes into account the conditions in the nip as well as the media thickness and backup roll temperature. First order explicit relationships are derived for fuse grade performance, which agree with existing predictions and measurements. The analysis can be used to design the fusing process and select materials and hardware.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 3
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2011.27.1.art00092_2
 articleview.views 3
 articleview.downloads 0
  Cite this article 

David Battat, "Image Fix Model for Belt Fusing System"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP27),  2011,  pp 767 - 771,  https://doi.org/10.2352/ISSN.2169-4451.2011.27.1.art00092_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2011
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(20110101)2011:2L.767;1-
nip_v2011n2/splitsection92.xml
/ist/nipdf/2011/00002011/00000002/art00092
Articles
Image Fix Model for Belt Fusing System
BattatDavid
01012011
2011
2
767
771
2011
A first principle formalism is proposed for image fix to describe Taber abrasion as well as crease in a hot roll belt system, which takes into account the conditions in the nip as well as the media thickness and backup roll temperature. First order explicit relationships are derived for fuse grade performance, which agree with existing predictions and measurements. The analysis can be used to design the fusing process and select materials and hardware.