Back to articles
Articles
Volume: 27 | Article ID: art00084_1
Image
The Study of the Pigment Surface-modified Technology of Inkjet Printing Ink
  DOI :  10.2352/ISSN.2169-4451.2011.27.1.art00084_1  Published OnlineJanuary 2011
Abstract

With the extensive application of computer and network technology in the fabric printing industry, digital inkjet printing attracts more and more people. As the particle size of pigment-based inkjet printing ink requires small size. In order to ensure the particle size of the inkjet printing ink to meet the requirement, surfactant is used to modify the property of pigment surface to control the particle size. Through fixed the amount of styrene-maleic anhydride (SMA) to study the effect of grinding conditions on the particle size of ink. Through fixed grinding conditions to study the effect of the amount of styrene-maleic anhydride (SMA) on the modified pigment. The particle size of the modified pigment was tested by using Laser particle analyzer. The shape of the modified pigment and the effect of the modified are observed by using SEM. The results show that the particle size of ink was smaller when the weight of styrene-maleic anhydride (SMA) account for 12.5% of the pigment, the rotate speed of grinding is 2200 r/min and the diameter of mill medium is 1.0-1.2mm.

Subject Areas :
Views 20
Downloads 2
 articleview.views 20
 articleview.downloads 2
  Cite this article 

Jifang Yan, Xianfu Wei, Beiqing Huang, "The Study of the Pigment Surface-modified Technology of Inkjet Printing Inkin Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP27),  2011,  pp 327 - 329,  https://doi.org/10.2352/ISSN.2169-4451.2011.27.1.art00084_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2011
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA