Back to articles
Articles
Volume: 27 | Article ID: art00021_2
Image
Preparation of Sliver Nanoparticles by Liquid Chemical Reduction Method
Tang Baoling
Chen Guangxue
Chen Qifeng
Tai Jinglei
  DOI :  10.2352/ISSN.2169-4451.2011.27.1.art00021_2  Published Online :  January 2011
Abstract

The development of printing electronics technology promotes the application of conductive ink, and nano-silver conductive ink is a hot research. Sliver particles are the main conductive component in conductive ink, so nano-silver particles are very important for the ink conductivity. In this paper, silver nanoparticles were reduced from silver nitrate solution by liquid chemical reduction method, with Sodium hypophosphite as reductant, PVP as surface-protection reagent, and sodium hexametaphosphate as dispersant. Orthogonal test with 4 factors and 3 levels is designed in which the effect of reducing agent dosage, protective agent dosage, dispersant content and reaction temperature on the nano-particle size and morphology of silver is investigated. The size distribution of nano-silver powder is measured by nano-size potential analyzer, and the morphology of silver particles is characterized with the SEM. The experiment results showed that the minimum average size of sliver particles can reach 23.87nm, and the dispersed spherical nano-particles with the average size is about 60nm can be obtained.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 5
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2011.27.1.art00021_2
 articleview.views 5
 articleview.downloads 0
  Cite this article 

Tang Baoling, Chen Guangxue, Chen Qifeng, Tai Jinglei, "Preparation of Sliver Nanoparticles by Liquid Chemical Reduction Method"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP27),  2011,  pp 492 - 495,  https://doi.org/10.2352/ISSN.2169-4451.2011.27.1.art00021_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2011
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(20110101)2011:2L.492;1-
nip_v2011n2/splitsection21.xml
/ist/nipdf/2011/00002011/00000002/art00021
Articles
Preparation of Sliver Nanoparticles by Liquid Chemical Reduction Method
BaolingTang
GuangxueChen
QifengChen
JingleiTai
01012011
2011
2
492
495
2011
The development of printing electronics technology promotes the application of conductive ink, and nano-silver conductive ink is a hot research. Sliver particles are the main conductive component in conductive ink, so nano-silver particles are very important for the ink conductivity. In this paper, silver nanoparticles were reduced from silver nitrate solution by liquid chemical reduction method, with Sodium hypophosphite as reductant, PVP as surface-protection reagent, and sodium hexametaphosphate as dispersant. Orthogonal test with 4 factors and 3 levels is designed in which the effect of reducing agent dosage, protective agent dosage, dispersant content and reaction temperature on the nano-particle size and morphology of silver is investigated. The size distribution of nano-silver powder is measured by nano-size potential analyzer, and the morphology of silver particles is characterized with the SEM. The experiment results showed that the minimum average size of sliver particles can reach 23.87nm, and the dispersed spherical nano-particles with the average size is about 60nm can be obtained.