Back to articles
Articles
Volume: 26 | Article ID: art00056_1
Image
Preparation and Properties of Encapsulated Phthalocyanine for Inkjet Printing Inks
Shaohai Fu
Kai Zhang
Mingjun Zhang
Anli Tian
  DOI :  10.2352/ISSN.2169-4451.2010.26.1.art00056_1  Published Online :  January 2010
Abstract

Encapsulated phthalocyanine blue pigment dispersion was prepared by polymerizale dispersant via free radical polymerization, and further was formulated into the inkjet printing ink. The properties of the ink were investigated. TEM and TGA proved that the pigment was encapsulated with some copolymer of Allyloxy Nonyl-phenoxy propanol polyoxyethylene ether ammonium sulfonate and styrene. The ink using these materials had excellent stability to freeze-thaw treatment and centrifugal forces, and its rheological behavior was close to Newtonian fluid. The properties of the ink satisfied with the requirement of Mimaki JV4-180 and can be used on Mimaki JV4-180.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 18
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2010.26.1.art00056_1
 articleview.views 18
 articleview.downloads 0
  Cite this article 

Shaohai Fu, Kai Zhang, Mingjun Zhang, Anli Tian, "Preparation and Properties of Encapsulated Phthalocyanine for Inkjet Printing Inks"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP26),  2010,  pp 202 - 205,  https://doi.org/10.2352/ISSN.2169-4451.2010.26.1.art00056_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2010
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(20100101)2010:1L.202;1-
nip_v2010n1/splitsection56.xml
/ist/nipdf/2010/00002010/00000001/art00056
Articles
Preparation and Properties of Encapsulated Phthalocyanine for Inkjet Printing Inks
FuShaohai
ZhangKai
ZhangMingjun
TianAnli
01012010
2010
1
202
205
2010
Encapsulated phthalocyanine blue pigment dispersion was prepared by polymerizale dispersant via free radical polymerization, and further was formulated into the inkjet printing ink. The properties of the ink were investigated. TEM and TGA proved that the pigment was encapsulated with some copolymer of Allyloxy Nonyl-phenoxy propanol polyoxyethylene ether ammonium sulfonate and styrene. The ink using these materials had excellent stability to freeze-thaw treatment and centrifugal forces, and its rheological behavior was close to Newtonian fluid. The properties of the ink satisfied with the requirement of Mimaki JV4-180 and can be used on Mimaki JV4-180.