Back to articles
Articles
Volume: 24 | Article ID: art00092_2
Image
Conductive Microwire Patterning Using Laser Thermal Transfer Method
Katsuhiro Yoshida
  DOI :  10.2352/ISSN.2169-4451.2008.24.1.art00092_2  Published Online :  January 2008
Abstract

Laser thermal transfer method, or LT2M was performed on PET and glass substrates with Cu, ITO (Indium Tin Oxide), using microwire conductive patterning. PET substrate Cu 1.5 μm was printed with a line width of 75 μm, and also a thickness of Cu 0.6 μm was printed with a line width of 50 μm. On the glass substrate, ITO 0.25 μm thickness was printed with a line width of 30 μm.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 2
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2008.24.1.art00092_2
 articleview.views 2
 articleview.downloads 0
  Cite this article 

Katsuhiro Yoshida, "Conductive Microwire Patterning Using Laser Thermal Transfer Method"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP24),  2008,  pp 826 - 828,  https://doi.org/10.2352/ISSN.2169-4451.2008.24.1.art00092_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2008
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(20080101)2008:2L.826;1-
nip_v2008n2/splitsection92.xml
/ist/nipdf/2008/00002008/00000002/art00092
Articles
Conductive Microwire Patterning Using Laser Thermal Transfer Method
YoshidaKatsuhiro
01012008
2008
2
826
828
2008
Laser thermal transfer method, or LT2M was performed on PET and glass substrates with Cu, ITO (Indium Tin Oxide), using microwire conductive patterning. PET substrate Cu 1.5 μm was printed with a line width of 75 μm, and also a thickness of Cu 0.6 μm was printed with a line width of 50 μm. On the glass substrate, ITO 0.25 μm thickness was printed with a line width of 30 μm.