Back to articles
Articles
Volume: 24 | Article ID: art00081_1
Image
Observation of Surface Change of Corona Discharge Wire
Jiang Song
Huang Jing-chen
Hoshino Yasushi
  DOI :  10.2352/ISSN.2169-4451.2008.24.1.art00081_1  Published Online :  January 2008
Abstract

The stability and uniformity of corona discharge are significant in the electrophotographic process. The corona discharge is easily affected by the state of the wire surface and environment. The discharges were occurred at 1 hour, 3 hours, 10 hours and 20 hours. The morphology of the products grown on the wire surfaces was investigated. With an increase of the discharge time, the needle crystals, instead of the spots grow on the wire surfaces in the positive cases. On the other hand, a large amount of projections distribute on the wire surfaces non-uniformly, and some projections grow to cluster in the negative cases. By a long discharge time, a thin silicon oxide film grows to cover on the wire surfaces non-uniformly in both polarity cases. The growths of the products affected by the discharge current also are studied.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 11
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2008.24.1.art00081_1
 articleview.views 11
 articleview.downloads 0
  Cite this article 

Jiang Song, Huang Jing-chen, Hoshino Yasushi, "Observation of Surface Change of Corona Discharge Wire"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP24),  2008,  pp 313 - 316,  https://doi.org/10.2352/ISSN.2169-4451.2008.24.1.art00081_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2008
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(20080101)2008:1L.313;1-
nip_v2008n1/splitsection81.xml
/ist/nipdf/2008/00002008/00000001/art00081
Articles
Observation of Surface Change of Corona Discharge Wire
SongJiang
Jing-chenHuang
YasushiHoshino
01012008
2008
1
313
316
2008
The stability and uniformity of corona discharge are significant in the electrophotographic process. The corona discharge is easily affected by the state of the wire surface and environment. The discharges were occurred at 1 hour, 3 hours, 10 hours and 20 hours. The morphology of the products grown on the wire surfaces was investigated. With an increase of the discharge time, the needle crystals, instead of the spots grow on the wire surfaces in the positive cases. On the other hand, a large amount of projections distribute on the wire surfaces non-uniformly, and some projections grow to cluster in the negative cases. By a long discharge time, a thin silicon oxide film grows to cover on the wire surfaces non-uniformly in both polarity cases. The growths of the products affected by the discharge current also are studied.