Back to articles
Articles
Volume: 23 | Article ID: art00112_2
Image
Powder Coating Using Electromagnetic Brush Technology
Juergen Kress
  DOI :  10.2352/ISSN.2169-4451.2007.23.1.art00112_2  Published Online :  January 2007
Abstract

Powder coatings were deposited on metal foils in a reel to reel process using EMB technology. The thickness of the obtained layers was in the range of 20-100 μm with deviations of +/− 3 %.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 12
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2007.23.1.art00112_2
 articleview.views 12
 articleview.downloads 0
  Cite this article 

Juergen Kress, "Powder Coating Using Electromagnetic Brush Technology"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP23),  2007,  pp 965 - 966,  https://doi.org/10.2352/ISSN.2169-4451.2007.23.1.art00112_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2007
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(20070101)2007:2L.965;1-
nip_v2007n2/splitsection112.xml
/ist/nipdf/2007/00002007/00000002/art00112
Articles
Powder Coating Using Electromagnetic Brush Technology
KressJuergen
01012007
2007
2
965
966
2007
Powder coatings were deposited on metal foils in a reel to reel process using EMB technology. The thickness of the obtained layers was in the range of 20-100 μm with deviations of +/− 3 %.