Back to articles
Articles
Volume: 23 | Article ID: art00107_1
Image
Energy-saving technology for fusing systems using EDLC power assistance
  DOI :  10.2352/ISSN.2169-4451.2007.23.1.art00107_1  Published OnlineJanuary 2007
Abstract

A new fusing technology using EDLC (Electric Double Layer Capacitor) power assistance has been developed which greatly reduces the warm-up time and energy consumption. The charged power of EDLC is used for heating energy of fusing unit. The power assistance can be used for the temperature drop during the early stage of the continuous paper feeding. Furthermore, it is applicable to the acceleration of temperature rise of the fuser roller for start-up or recovery stage.The technology is adopted in high-speed MFP from Ricoh.

Subject Areas :
Views 3
Downloads 0
 articleview.views 3
 articleview.downloads 0
  Cite this article 

Kazuhito Kishi, Naoki Satoh, Yasuhisa Katoh, Masami Okamoto, "Energy-saving technology for fusing systems using EDLC power assistancein Proc. IS&T Int'l Conf. on Digital Printing Technologies and Digital Fabrication (NIP23),  2007,  pp 469 - 472,  https://doi.org/10.2352/ISSN.2169-4451.2007.23.1.art00107_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2007
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA