Back to articles
Articles
Volume: 22 | Article ID: art00079_2
Image
Effect of Silica Pore Characteristics on Inkjet Print Attributes
Sanjay A. Monie
Beate C. Stief
Natalia V. Krupkin
  DOI :  10.2352/ISSN.2169-4451.2006.22.1.art00079_2  Published Online :  January 2006
Abstract

Simple pore-volume measurements are not sufficient to fully understand the absorption of inkjet inks into microporous inkjet media, especially as manifested in print artifacts such as ink coalescence, ink bleed and ink drying time. In this paper, we will investigate the influence of other pore characteristics such as pore size and distribution on the aforementioned print attributes, using porous silica pigments, both commercial and under development. This paper will also look at the influence of coat-weight in overcoming bleed and coalescence and its implications for microporous coating design.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 16
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2006.22.1.art00079_2
 articleview.views 16
 articleview.downloads 0
  Cite this article 

Sanjay A. Monie, Beate C. Stief, Natalia V. Krupkin, "Effect of Silica Pore Characteristics on Inkjet Print Attributes"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP22),  2006,  pp 611 - 614,  https://doi.org/10.2352/ISSN.2169-4451.2006.22.1.art00079_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2006
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(20060101)2006:2L.611;1-
nip_v2006n2/splitsection79.xml
/ist/nipdf/2006/00002006/00000002/art00079
Articles
Effect of Silica Pore Characteristics on Inkjet Print Attributes
MonieSanjay A.
StiefBeate C.
KrupkinNatalia V.
01012006
2006
2
611
614
2006
Simple pore-volume measurements are not sufficient to fully understand the absorption of inkjet inks into microporous inkjet media, especially as manifested in print artifacts such as ink coalescence, ink bleed and ink drying time. In this paper, we will investigate the influence of other pore characteristics such as pore size and distribution on the aforementioned print attributes, using porous silica pigments, both commercial and under development. This paper will also look at the influence of coat-weight in overcoming bleed and coalescence and its implications for microporous coating design.