Back to articles
Articles
Volume: 22 | Article ID: art00071_1
Image
Development of Low-power Thermal Printing Technology
Hisashi Hoshino
Hirotoshi Terao
  DOI :  10.2352/ISSN.2169-4451.2006.22.1.art00071_1  Published Online :  January 2006
Abstract

We examined a power saving on thermal printing. We looked into thermal head structure, energizing condition and medium structure suitable for power saving. The numerical analysis by the finite element method was applied to the examination. In order to confirm the parameters influence, contribution rate of each parameter was examined by optimization tool based on experimental design. We have achieved power saving by this examination.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 13
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2006.22.1.art00071_1
 articleview.views 13
 articleview.downloads 0
  Cite this article 

Hisashi Hoshino, Hirotoshi Terao, "Development of Low-power Thermal Printing Technology"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP22),  2006,  pp 277 - 280,  https://doi.org/10.2352/ISSN.2169-4451.2006.22.1.art00071_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2006
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(20060101)2006:1L.277;1-
nip_v2006n1/splitsection71.xml
/ist/nipdf/2006/00002006/00000001/art00071
Articles
Development of Low-power Thermal Printing Technology
HoshinoHisashi
TeraoHirotoshi
01012006
2006
1
277
280
2006
We examined a power saving on thermal printing. We looked into thermal head structure, energizing condition and medium structure suitable for power saving. The numerical analysis by the finite element method was applied to the examination. In order to confirm the parameters influence, contribution rate of each parameter was examined by optimization tool based on experimental design. We have achieved power saving by this examination.