Back to articles
Articles
Volume: 22 | Article ID: art00069_2
Image
Study on Modeling of Fuser-generated Curled Sheets and a Prediction of Dog-Ear Defect in a Sheet-feeding Unit Using a Three-dimensional Sheet-feeding Simulation
Shogo Matsumoto
Hiroyuki Seki
  DOI :  10.2352/ISSN.2169-4451.2006.22.1.art00069_2  Published Online :  January 2006
Abstract

Modeling of curled sheet for three-dimensional sheet feeding simulation was studied. Dimension and stiffness of curled sheet that affected by moisture content of sheet was studied experimentally. Curled sheet was modeled by using obtained sheet characteristics, and three-dimensional sheet feeding simulation was executed by using the model. It was confirmed that our model can simulate dog-eared defect of fuser-generated curled sheet in sheet feeding unit.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 15
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2006.22.1.art00069_2
 articleview.views 15
 articleview.downloads 0
  Cite this article 

Shogo Matsumoto, Hiroyuki Seki, "Study on Modeling of Fuser-generated Curled Sheets and a Prediction of Dog-Ear Defect in a Sheet-feeding Unit Using a Three-dimensional Sheet-feeding Simulation"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP22),  2006,  pp 581 - 584,  https://doi.org/10.2352/ISSN.2169-4451.2006.22.1.art00069_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2006
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(20060101)2006:2L.581;1-
nip_v2006n2/splitsection69.xml
/ist/nipdf/2006/00002006/00000002/art00069
Articles
Study on Modeling of Fuser-generated Curled Sheets and a Prediction of Dog-Ear Defect in a Sheet-feeding Unit Using a Three-dimensional Sheet-feeding Simulation
MatsumotoShogo
SekiHiroyuki
01012006
2006
2
581
584
2006
Modeling of curled sheet for three-dimensional sheet feeding simulation was studied. Dimension and stiffness of curled sheet that affected by moisture content of sheet was studied experimentally. Curled sheet was modeled by using obtained sheet characteristics, and three-dimensional sheet feeding simulation was executed by using the model. It was confirmed that our model can simulate dog-eared defect of fuser-generated curled sheet in sheet feeding unit.