Back to articles
Articles
Volume: 20 | Article ID: art00102_2
Image
Study of a D2T2 Printing for High-Speed Print
Tatsuhiko Asada
Hiroshi Kobayashi
Hirotoshi Terao
  DOI :  10.2352/ISSN.2169-4451.2004.20.1.art00102_2  Published Online :  January 2004
Abstract

We studied a D2T2 print featured high speed print. The head used was optimized and it is necessary to have optimized the head drive to speed it up. Optimizing head structure and optimizing head energy control was indispensable for high-speed print. In a high-speed print, the problem of Kogation on the surface of the head occurred. The counter measure was necessary. These problems were solved, and a high-speed print of 2ips-3ips was able to be achieved with the D2T2 print.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 13
Downloads 2
 DOI 10.2352/ISSN.2169-4451.2004.20.1.art00102_2
 articleview.views 13
 articleview.downloads 2
  Cite this article 

Tatsuhiko Asada, Hiroshi Kobayashi, Hirotoshi Terao, "Study of a D2T2 Printing for High-Speed Print"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP20),  2004,  pp 993 - 996,  https://doi.org/10.2352/ISSN.2169-4451.2004.20.1.art00102_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2004
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(20040101)2004:2L.993;1-
nip_v2004n2/splitsection102.xml
/ist/nipdf/2004/00002004/00000002/art00102
Articles
Study of a D2T2 Printing for High-Speed Print
AsadaTatsuhiko
KobayashiHiroshi
TeraoHirotoshi
01012004
2004
2
993
996
2004
We studied a D2T2 print featured high speed print. The head used was optimized and it is necessary to have optimized the head drive to speed it up. Optimizing head structure and optimizing head energy control was indispensable for high-speed print. In a high-speed print, the problem of Kogation on the surface of the head occurred. The counter measure was necessary. These problems were solved, and a high-speed print of 2ips-3ips was able to be achieved with the D2T2 print.