Back to articles
Articles
Volume: 20 | Article ID: art00017_1
Image
DEM Simulations of Toner Behavior in the Development Nip of the Océ Direct Imaging Print Process
I.E.M. Severens
  DOI :  10.2352/ISSN.2169-4451.2004.20.1.art00017_1  Published Online :  January 2004
Abstract

This paper describes the modeling of the toner behavior in the development nip of the Océ Direct Imaging print process. The discrete element method is used as the simulation tool for a quantitative description of the system. The interaction rules and the associated parameters are determined for the toner particles and the surfaces of the development rollers. The model is validated with print quality results. It is shown that it is possible to achieve quantitative agreement between DEM simulations and experimental print quality results.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 10
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2004.20.1.art00017_1
 articleview.views 10
 articleview.downloads 0
  Cite this article 

I.E.M. Severens, "DEM Simulations of Toner Behavior in the Development Nip of the Océ Direct Imaging Print Process"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP20),  2004,  pp 67 - 72,  https://doi.org/10.2352/ISSN.2169-4451.2004.20.1.art00017_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2004
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(20040101)2004:1L.67;1-
nip_v2004n1/splitsection17.xml
/ist/nipdf/2004/00002004/00000001/art00017
Articles
DEM Simulations of Toner Behavior in the Development Nip of the Océ Direct Imaging Print Process
SeverensI.E.M.
01012004
2004
1
67
72
2004
This paper describes the modeling of the toner behavior in the development nip of the Océ Direct Imaging print process. The discrete element method is used as the simulation tool for a quantitative description of the system. The interaction rules and the associated parameters are determined for the toner particles and the surfaces of the development rollers. The model is validated with print quality results. It is shown that it is possible to achieve quantitative agreement between DEM simulations and experimental print quality results.