Back to articles
Articles
Volume: 20 | Article ID: art00013_1
Image
Toner Transport Characteristics in Long Ovally Dented Electrode
  DOI :  10.2352/ISSN.2169-4451.2004.20.1.art00013_1  Published OnlineJanuary 2004
Abstract

Toner control is important in electrophotography and also a new toner printing. The new printing technology, which utilizes conductive toner, is proposed. In the technology, toner cloud is generated by voltage application and toner beam is extracted from the toner cloud to a receiver, such as paper. To realize the new technology, it is necessary to generate toner cloud uniformly over a certain width. Toner cloud transport in long ovally dented electrode is investigated. The speed of toner cloud is observed by a digital camera and the speed dependences on applied voltage, toner amount, and distance between electrodes are obtained. The possible mechanism of toner cloud transport to long oval direction is discussed.

Subject Areas :
Views 19
Downloads 0
 articleview.views 19
 articleview.downloads 0
  Cite this article 

Suda Kiatkamjornwong, Chayanont Chansorn, Yasushi Hoshino, "Toner Transport Characteristics in Long Ovally Dented Electrodein Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP20),  2004,  pp 47 - 50,  https://doi.org/10.2352/ISSN.2169-4451.2004.20.1.art00013_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2004
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA