Back to articles
Articles
Volume: 19 | Article ID: art00079_1
Image
Different Systems of Epoxy Adhesives for Use with Ink-Jet Print Head
  DOI :  10.2352/ISSN.2169-4451.2003.19.1.art00079_1  Published OnlineJanuary 2003
Abstract

Epoxy adhesives are commonly used for bonding ink-jet cartridge and silicon base print head. A suitable adhesive provides good ink resistance and bonding strength. Its curing conditions, such as reaction time and temperature, are also limited by the requirement of manufacturing process. We compared the reactive mechanism of three epoxy systems, including epoxy-cationic initiator, epoxy-imidazole and epoxy-polyamine. The differences in reaction time, ink resistance, bonding strength and reaction temperature between these adhesives will also be discussed in this study.

Subject Areas :
Views 4
Downloads 0
 articleview.views 4
 articleview.downloads 0
  Cite this article 

Huen-Ling Chen, Ming-Shiu Li, Chi-Bin Lo, Chun-Jung Chen, I-Hsing Huang, Wei-Chum Chao, "Different Systems of Epoxy Adhesives for Use with Ink-Jet Print Headin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP19),  2003,  pp 333 - 337,  https://doi.org/10.2352/ISSN.2169-4451.2003.19.1.art00079_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2003
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA