Back to articles
Volume: 19 | Article ID: art00050_1
Fine Grinding of Carbon Black
  DOI :  10.2352/ISSN.2169-4451.2003.19.1.art00050_1  Published OnlineJanuary 2003

Producing fine particle size and narrow particle size distributions in aqueous organic pigment dispersions is a significant challenge. Therefore, optimum utilization of both bead milling and chemical technologies is necessary to most efficiently achieve stable dispersions with the target particle size characteristics. This paper describes the effects of bead mill size and dispersant chemistry on particle size reduction for difficult-to-disperse carbon black pigment.

Subject Areas :
Views 7
Downloads 1
 articleview.views 7
 articleview.downloads 1
  Cite this article 

Harry Way, Steven A. Schwartz, Sallie J. Lee, Adam Chan, "Fine Grinding of Carbon Blackin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP19),  2003,  pp 207 - 208,

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2003
NIP & Digital Fabrication Conference
nip digi fabric conf
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA