Back to articles
Articles
Volume: 19 | Article ID: art00040_1
Image
Toner Having High Durability for Non-Magnetic Mono-Component Process
  DOI :  10.2352/ISSN.2169-4451.2003.19.1.art00040_1  Published OnlineJanuary 2003
Abstract

In a Non-magnetic Mono-component Process, High durability toner for Longer Life Cartridges is expected especially for higher printing speed. The key factor for long life is the high durability toner and it can be measured by the level of contamination onto the charging blade/developer roller. A toner was developed with this feature and the improvement carried out by utilizing a Cyclo Olefin Copolymer resin. The toner durability was examined by comparing on the charging blade/developer roller contamination with typical toner binders such as styrene/acrylic and polyester resins.

Subject Areas :
Views 5
Downloads 1
 articleview.views 5
 articleview.downloads 1
  Cite this article 

Takayuki Hamanaka, Moriyuki Goto, Nobuyuki Aoki, "Toner Having High Durability for Non-Magnetic Mono-Component Processin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP19),  2003,  pp 165 - 167,  https://doi.org/10.2352/ISSN.2169-4451.2003.19.1.art00040_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2003
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA