Back to articles
Volume: 18 | Article ID: art00096_1
Monochrome and Full-Color Polymer Light-Emitting Displays Fabricated by Ink-Jet Printing
  DOI :  10.2352/ISSN.2169-4451.2002.18.1.art00096_1  Published OnlineJanuary 2002

One of the first commercial applications of “plastic” or polymer electronics will be in the field of display technology. Polymer Light-Emitting Displays (PLEDs) are emissive, have a wide viewing angle and high contrast. They are also very thin and lightweight. Several companies are already in advanced stages of commercial develop-ment. These first display products will be monochrome, but will soon be followed by full-color versions. These full-color displays are likely to be fabricated using ink-jet printing techniques. This paper discusses some of the technical issues.

Subject Areas :
Views 2
Downloads 0
 articleview.views 2
 articleview.downloads 0
  Cite this article 

Ian D. Parker, G. Yu, M. Anzlowar, E. Baggao, J. Innocenzo, W. Lehr, G. Srdanov, M. Stainer, M. Stevenson, B. Zhang, "Monochrome and Full-Color Polymer Light-Emitting Displays Fabricated by Ink-Jet Printingin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP18),  2002,  pp 393 - 396,

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2002
NIP & Digital Fabrication Conference
nip digi fabric conf
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA