Back to articles
Volume: 18 | Article ID: art00068_1
Tailoring Resin Properties of In-situ Suspension Polymerized Toner
  DOI :  10.2352/ISSN.2169-4451.2002.18.1.art00068_1  Published OnlineJanuary 2002

Tailoring resin property of polymerized toner by varying monomer ratio, temperature, initiator, pigments and cross-linking agent is being experimentally studied in this paper. The resin properties of polymerized toner and commercial melt-mixing toner were evaluated with the glass transition temperature, molecular weight distribution, softening point and melt index. Research results indicate that added pigment has a heavy influence on the resin's property.

Subject Areas :
Views 2
Downloads 0
 articleview.views 2
 articleview.downloads 0
  Cite this article 

Jun Yang, Hong He, Ting-jie Wang, Yong Jin, "Tailoring Resin Properties of In-situ Suspension Polymerized Tonerin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP18),  2002,  pp 274 - 277,

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2002
NIP & Digital Fabrication Conference
nip digi fabric conf
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA