Back to articles
Articles
Volume: 18 | Article ID: art00050_2
Image
Effect of CCA Particle Configuration on the Charging Behavior of CCA/Binder Matrix Film Surface
  DOI :  10.2352/ISSN.2169-4451.2002.18.1.art00050_2  Published OnlineJanuary 2002
Abstract

The amount of tribo-charging generated between CCA/binder matrix films and ferrite carrier beads were measured by the cascade method. CCA particles were dispersed or dissolved in several binder solutions, and these solutions were applied to stainless steel plates to prepare the CCA/binder matrix films. The results show that the amount of charge is determined by the size or orientation of the CCA particles on the matrix film surfaces and by the chemical interactions between the binder-resin molecules and the CCA particles. It was confirmed that the charging characteristics of the CCA/binder matrix can be evaluated quantitatively by the cascade measurement.

Subject Areas :
Views 3
Downloads 1
 articleview.views 3
 articleview.downloads 1
  Cite this article 

Keiki Suganami, Manabu Takeuchi, Toshihiko Oguchi, "Effect of CCA Particle Configuration on the Charging Behavior of CCA/Binder Matrix Film Surfacein Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP18),  2002,  pp 636 - 636,  https://doi.org/10.2352/ISSN.2169-4451.2002.18.1.art00050_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2002
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA