Back to articles
Articles
Volume: 18 | Article ID: art00044_1
Image
Media Advances in Dye Diffusion Thermal Transfer to Facilitate a Multihead Printer System
David G. Foster
Maurice L. Gray
  DOI :  10.2352/ISSN.2169-4451.2002.18.1.art00044_1  Published Online :  January 2002
Abstract

This paper describes the design of media for a new multihead printer system for dye diffusion thermal transfer. The media features include a dye donor that was redesigned with a new support thickness for increased efficiency and a new component load specifically designed for this system to deliver printing in the multihead configuration. In addition, a roll fed receiver was configured to give prints without paper curl in the final print. Curve shape and incubation results are discussed.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 1
Downloads 0
 DOI 10.2352/ISSN.2169-4451.2002.18.1.art00044_1
 articleview.views 1
 articleview.downloads 0
  Cite this article 

David G. Foster, Maurice L. Gray, "Media Advances in Dye Diffusion Thermal Transfer to Facilitate a Multihead Printer System"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP18),  2002,  pp 180 - 183,  https://doi.org/10.2352/ISSN.2169-4451.2002.18.1.art00044_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2002
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(20020101)2002:1L.180;1-
nip_v2002n1/splitsection44.xml
/ist/nipdf/2002/00002002/00000001/art00044
Articles
Media Advances in Dye Diffusion Thermal Transfer to Facilitate a Multihead Printer System
FosterDavid G.
GrayMaurice L.
01012002
2002
1
180
183
2002
This paper describes the design of media for a new multihead printer system for dye diffusion thermal transfer. The media features include a dye donor that was redesigned with a new support thickness for increased efficiency and a new component load specifically designed for this system to deliver printing in the multihead configuration. In addition, a roll fed receiver was configured to give prints without paper curl in the final print. Curve shape and incubation results are discussed.