Back to articles
Volume: 18 | Article ID: art00042_2
3D Image-to-Device Gamut Mapping Using Gamut Boundary Descriptor
  DOI :  10.2352/ISSN.2169-4451.2002.18.1.art00042_2  Published OnlineJanuary 2002

3D I-D GMA (Image-to-Device Gamut Mapping Algorithm) is an ideal way to map the display image to the inside of printer gamut. A quick decision whether each pixel is located at inside of the device gamut or not, is necessary to execute 3D I-D GMA. We proposed a new gamut boundary descriptor for comparing the gamut between image and device by discrete polar angle (, φ). The gamut shell is described as the simple radial distances, r-image. In this paper, we try to research the optimum r-image for 3D GMA. The printer gamut shell is desirable a smooth and a precise surface. Its gamut shell is examined to shape by polygon mesh and Overhauser Spline Fanctions. The 3D ID GMA using r-image is considered by the case of the single and the multi focal points. A psychophysical experiment has been carried out to make a comparison of color appearance matching between the original CRT image and the printed hardcopies after mapping.

Subject Areas :
Views 5
Downloads 0
 articleview.views 5
 articleview.downloads 0
  Cite this article 

Ryoichi Saito, Hiroaki Kotera, "3D Image-to-Device Gamut Mapping Using Gamut Boundary Descriptorin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP18),  2002,  pp 608 - 611,

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2002
NIP & Digital Fabrication Conference
nip digi fabric conf
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA