Back to articles
Articles
Volume: 18 | Article ID: art00027_1
Image
Semi-Conductive Polyurethane in EP Systems: A Comparison of “Dynamic” to “Static” Volume Resistivity Testing of Rollers
  DOI :  10.2352/ISSN.2169-4451.2002.18.1.art00027_1  Published OnlineJanuary 2002
Abstract

This paper explores testing of semi-conductive polyurethane materials as they apply to use in EP systems. A method for measurement of volume resistivity and Electrical characteristics over time are explored in detail. A common formula for specifying resistivity is explained, as is the effect of dynamic measurement vs. static measurement. This paper is an extension of the paper presented at IS&T NIP-17 which explained basic manufacture and specification of Ionic conductive doped polyurethane as used in EP systems.

Subject Areas :
Views 4
Downloads 1
 articleview.views 4
 articleview.downloads 1
  Cite this article 

Charles J. Matteliano, "Semi-Conductive Polyurethane in EP Systems: A Comparison of “Dynamic” to “Static” Volume Resistivity Testing of Rollersin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP18),  2002,  pp 114 - 117,  https://doi.org/10.2352/ISSN.2169-4451.2002.18.1.art00027_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2002
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA