Back to articles
Volume: 18 | Article ID: art00023_2
Dry Toner Based Electrophotographic Printing of Extrusion Coated Packaging Boards
  DOI :  10.2352/ISSN.2169-4451.2002.18.1.art00023_2  Published OnlineJanuary 2002

Digital printing is suitable for short runs of highly personated packagings. The obvious benefit of digital printing is low waste amount and print-on-demand. The status of digital printing, at least in packaging sector, is still quite moderate, but the future is bright and it has been estimated that this method will increase more than the traditional printing techniques. The quality of digital printing will also approach that of offset.The aim of this study was to evaluate printability of various extrusion coatings used for packaging boards and to map out important material and process parameters.

Subject Areas :
Views 5
Downloads 0
 articleview.views 5
 articleview.downloads 0
  Cite this article 

Johanna Lahti, Jari P. Räsänen, Tapani Penttinen, "Dry Toner Based Electrophotographic Printing of Extrusion Coated Packaging Boardsin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP18),  2002,  pp 520 - 524,

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2002
NIP & Digital Fabrication Conference
nip digi fabric conf
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA