Back to articles
Volume: 17 | Article ID: art00102_1
3D Gamut Comparison between Image and Device for Gamut Mapping
  DOI :  10.2352/ISSN.2169-4451.2001.17.1.art00102_1  Published OnlineJanuary 2001

This paper proposes a simple and easy method for 3D gamut comparison between image and device. In the previous paper, we reported 3D I-D GMA (Image-to-Device Gamut Mapping Algorithm) is a best way to make the appearance matching between display and print images. A quick decision whether each pixel is located at inside of the device gamut or not, is necessary to execute 3D I-D GM. In this paper, both 3D image and device gamut shells are shaped as polygon meshes in the segmented discrete polar angle (i, φj) by extracting the most outside points from the random color distributions of source image. The image and device gamut boundaries are quickly compared between polar angle segments and the pixels located at the outside of device gamut are automatically separated. 3D I-D GMA has been executed by mapping the image color points into the inside of device gamut shell referencing to the surface points on the corresponding polar segments.A variety of image gamut shapes are compared with that of inkjet printer and experimental results in 3D Image-to-Device GMA are reported.

Subject Areas :
Views 8
Downloads 0
 articleview.views 8
 articleview.downloads 0
  Cite this article 

Ryoichi Saito, Hiroaki Kotera, "3D Gamut Comparison between Image and Device for Gamut Mappingin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP17),  2001,  pp 454 - 457,

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2001
NIP & Digital Fabrication Conference
nip digi fabric conf
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA