Back to articles
Volume: 17 | Article ID: art00076_2
Flow Behavior of Micro Inkjet Drop on the Layer Surface of Micro Color Device
  DOI :  10.2352/ISSN.2169-4451.2001.17.1.art00076_2  Published OnlineJanuary 2001

Flow behavior for micro liquid drop has been studied in the paper. First of all, some micro patterns were formed on flat surface of substrates specific. Note that the patterns could be either strip or rectangular block types where each micro block has hundreds of micro meters (μm). Then the liquid drop having volume of less than 100 pico-liters could be shot by an inkjet print head of printing robot. Thus, by varying the geometrical structures of those blocks, the inkjet flow behavior can make difference on the layer of substrate. With the fundamental of micro flow behavior, it could help applying the inkjet technology onto the color (Red, Green, Blue) coating process of micro substrate, such as color filters and PLED devices. Hence, it's expected that those industrial application of opto-electronic devices by inkjet method will be pretty promising in the near future.

Subject Areas :
Views 6
Downloads 0
 articleview.views 6
 articleview.downloads 0
  Cite this article 

Chin-Tai Chen, Tz-Ya Yang, "Flow Behavior of Micro Inkjet Drop on the Layer Surface of Micro Color Devicein Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP17),  2001,  pp 776 - 779,

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2001
NIP & Digital Fabrication Conference
nip digi fabric conf
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA