Back to articles
Articles
Volume: 17 | Article ID: art00011_2
Image
Study of 1200dpi High Resolution Thermal Print Head
  DOI :  10.2352/ISSN.2169-4451.2001.17.1.art00011_2  Published OnlineJanuary 2001
Abstract

This paper is intended as an evaluation of a high-resolution thermal print head exceeding 600dpi. In the preceding paper we reported on the optimum structure and shape for 600dpi-head based on a series of experiments on thermal diffusivity of various materials possibly used as components. In the process of development we reached a two-ply structure consisted of a Si-single-crystal substrate superior in heat conductivity and a low thermal diffusion layer sputtered over the substrate. Carrying out FEM analysis of a 1200dpi-head of the above structure, we came to the conclusion that high resolution up of to 1200dpi was technically achievable. We also confirmed the possibility through print test.

Subject Areas :
Views 3
Downloads 0
 articleview.views 3
 articleview.downloads 0
  Cite this article 

Hirotoshi Terao, Toshifumi Nakatani, Noboru Tsushima, Ikuo Hibino, "Study of 1200dpi High Resolution Thermal Print Headin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP17),  2001,  pp 504 - 507,  https://doi.org/10.2352/ISSN.2169-4451.2001.17.1.art00011_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2001
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA