Back to articles
Articles
Volume: 16 | Article ID: art00057_1
Image
Microporous Paper for Use in Digital Printing
  DOI :  10.2352/ISSN.2169-4451.2000.16.1.art00057_1  Published OnlineJanuary 2000
Abstract

We have developed paper sheets having microporous layers that meet the demands for print quality in digital printing. In 1999 we reported on the preparation and print quality of this microporous paper, which is used in thermal wax transfer printing.In this paper, the application of this microporous paper for toner-based marking is described. The application of the microporous technology to toner-based marking ensures that the paper has little gloss even after printing. Other print qualities such as mottle, the reproduction of the gray scale level, TEP and NEP are better than other types of paper as well.

Subject Areas :
Views 5
Downloads 0
 articleview.views 5
 articleview.downloads 0
  Cite this article 

S. Maeda, T. Nakai, Y. Oba, A. Nakamura, M. Kato, M. Shinozaki, K. Ohara, "Microporous Paper for Use in Digital Printingin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP16),  2000,  pp 212 - 215,  https://doi.org/10.2352/ISSN.2169-4451.2000.16.1.art00057_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2000
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA