Back to articles
Articles
Volume: 16 | Article ID: art00034_1
Image
New DOD Printhead For Industrial Applications
  DOI :  10.2352/ISSN.2169-4451.2000.16.1.art00034_1  Published OnlineJanuary 2000
Abstract

A novel drop on demand, Piezo based inkjet printhead, was developed in Scitex Corporation in the last 7 Years.In the last 7 years, a novel inkjet printhead was developed in Scityex Corporation. The printhead is a Drop on demand, Piezo based inkjet. It is built around a core of sintered stainless steel porous material that provides a number of advantages, among them:• Very high ejection frequencies with low cross-talk• Structural Simplicity and hence reliable and low cost printhead,• Very effective ink filteration.• Building materials tolerant to a wide range of ink formulations.These features make the new printhead very attractive to Industrial applications.This paper describes the printhead structure in detail, summerizes the main jetting characteristics and discusses possible printheads arrangements for different applications.

Subject Areas :
Views 14
Downloads 0
 articleview.views 14
 articleview.downloads 0
  Cite this article 

Haggai Karlinski, "New DOD Printhead For Industrial Applicationsin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP16),  2000,  pp 128 - 128,  https://doi.org/10.2352/ISSN.2169-4451.2000.16.1.art00034_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2000
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA