Back to articles
Articles
Volume: 15 | Article ID: art00087_1
Image
Inverse of Transmission Characteristics of Printing Ink Layers by Using an Adaptive Inverse Filter for Illuminants
  DOI :  10.2352/ISSN.2169-4451.1999.15.1.art00087_1  Published OnlineJanuary 1999
Abstract

In this paper, an ill condition problem which estimate a transmission characteristics under the assumption that only the output characteristics can be observed. In the inverse problem, the physical characteristics of a printing ink (colorant) layer correspond to the transmission characteristics, an illuminant corresponds to the input and the reproduced color corresponds to the output. For a solution of the inverse problem, an adaptive inverse filter for illuminants is employed to remove the characteristics of illuminants. And an inverse solution method to estimate the transmission characteristics is applied after removing the characteristics of an illuminant. Simulation results have shown the efficiency of the method.

Subject Areas :
Views 9
Downloads 0
 articleview.views 9
 articleview.downloads 0
  Cite this article 

Nobuhito Matsushiro, Norihide Miyamura, "Inverse of Transmission Characteristics of Printing Ink Layers by Using an Adaptive Inverse Filter for Illuminantsin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP15),  1999,  pp 334 - 337,  https://doi.org/10.2352/ISSN.2169-4451.1999.15.1.art00087_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 1999
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA