Back to articles
Articles
Volume: 15 | Article ID: art00050_2
Image
Toner Having Low Energy Fusibility for High Speed Non-magnetic Mono-component Process
  DOI :  10.2352/ISSN.2169-4451.1999.15.1.art00050_2  Published OnlineJanuary 1999
Abstract

A toner has been developed having low energy fusibility, high durability and high stability of charge characteristics for high speed non-magnetic mono-component process. This toner is applicable in printing speeds up to 45ppm in an electrophotographic printer, by improving the durability of the toner. The improvement was carried out by reducing the low molecular weight component without raising the thermal characteristics of toner resin, improving the dispersion of additives in toner resin and round-edging the toner shape. This toner is also suitable for application in printings with speeds down to 12ppm because of the improved stability of the charge characteristics and the reduced background fog.

Subject Areas :
Views 6
Downloads 1
 articleview.views 6
 articleview.downloads 1
  Cite this article 

Tatsuru Matsumoto, Hiroki Totsuka, Akihiro Sano, "Toner Having Low Energy Fusibility for High Speed Non-magnetic Mono-component Processin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP15),  1999,  pp 578 - 581,  https://doi.org/10.2352/ISSN.2169-4451.1999.15.1.art00050_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 1999
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA