Back to articles
Articles
Volume: 15 | Article ID: art00048_1
Image
Influence of Polymer-Polymer Interactions on Properties of Ink Jet Coatings
Khizyr Khoultchaev
Tom Graczyk
  DOI :  10.2352/ISSN.2169-4451.1999.15.1.art00048_1  Published Online :  January 1999
Abstract

Theoretical and practical aspects of the consequences of polymer-polymer interactions in ink jet receiver coating are discussed. Several examples are presented pertaining to type of modification and charges of polyvinyl alcohol will have an effect on print quality with dye and pigmented inks. It is shown that the introduction of a dye fixative to the coating improves the water fastness but has negative effect on print quality. It was found that the pH adjustments in the ink receiving layers increase the gloss of the media.

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 10
Downloads 1
 DOI 10.2352/ISSN.2169-4451.1999.15.1.art00048_1
 articleview.views 10
 articleview.downloads 1
  Cite this article 

Khizyr Khoultchaev, Tom Graczyk, "Influence of Polymer-Polymer Interactions on Properties of Ink Jet Coatings"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP15),  1999,  pp 187 - 191,  https://doi.org/10.2352/ISSN.2169-4451.1999.15.1.art00048_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 1999
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(19990101)1999:1L.187;1-
nip_v1999n1/splitsection48.xml
/ist/nipdf/1999/00001999/00000001/art00048
Articles
Influence of Polymer-Polymer Interactions on Properties of Ink Jet Coatings
KhoultchaevKhizyr
GraczykTom
01011999
1999
1
187
191
1999
Theoretical and practical aspects of the consequences of polymer-polymer interactions in ink jet receiver coating are discussed. Several examples are presented pertaining to type of modification and charges of polyvinyl alcohol will have an effect on print quality with dye and pigmented inks. It is shown that the introduction of a dye fixative to the coating improves the water fastness but has negative effect on print quality. It was found that the pH adjustments in the ink receiving layers increase the gloss of the media.