Back to articles
Volume: 15 | Article ID: art00039_1
Assessment of Plain Paper Printability by Office Ink Jet Printers
  DOI :  10.2352/ISSN.2169-4451.1999.15.1.art00039_1  Published OnlineJanuary 1999

This paper describes tests which have been developed to measure a number of quality metrics relevant to ink jet printing on plain paper. Analytical test targets were printed on paper manufactured with different levels of surface and internal sizing treatment according to a statistical design. The prints were made using several commercially available ink jet printers. Images of microscope and scanner targets were analyzed using ImageXpert™, an image analysis system. The resulting data could be used to optimize sizing levels for maximum effectiveness in achieving good print quality performance.

Subject Areas :
Views 4
Downloads 0
 articleview.views 4
 articleview.downloads 0
  Cite this article 

Lesley J. Barker, Gina M. Garro, Cheryn A. Kwasnik, Kate Johnson, "Assessment of Plain Paper Printability by Office Ink Jet Printersin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP15),  1999,  pp 151 - 154,

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 1999
NIP & Digital Fabrication Conference
nip digi fabric conf
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA