Back to articles
Articles
Volume: 15 | Article ID: art00038_2
Image
Characterization of Microstructures Found on the Surface of and Within Toner Particles -Particle Analyzer Dispersion Evaluation-
  DOI :  10.2352/ISSN.2169-4451.1999.15.1.art00038_2  Published OnlineJanuary 1999
Abstract

We have developed a particle analyzer system, the model PT1000, which analyzes particulates using helium microwave-induced plasma. The PT1000 can simultaneously measure the three-dimensional components, composition and size of individual particles without requiring any preparatory treatment. Applied to the evaluation of toner particles, the PT1000 enables changes in toner properties, that could not be identified with any other techniques, to be measured with high sensitivity. This paper discusses the correlation between variations in toner particle properties and analysis results using the PT1000, and presents the results of example measurements using new methods of analyzing property changes during the photodeveloping process and so on.

Subject Areas :
Views 11
Downloads 1
 articleview.views 11
 articleview.downloads 1
  Cite this article 

Toshiyuki Suzuki, Soji Sakamoto, Hisao Takahara, "Characterization of Microstructures Found on the Surface of and Within Toner Particles -Particle Analyzer Dispersion Evaluation-in Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP15),  1999,  pp 531 - 534,  https://doi.org/10.2352/ISSN.2169-4451.1999.15.1.art00038_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 1999
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA